普朗克視覺系統 生產用於便攜式檢測和全天候監控商業應用的熱像儀解決方案,包括早期火災偵測、製造業、變電站和隧道、電氣面板/機櫃、儲存設施、資料中心和體溫升高篩檢。本公司總部位於美國紅外線感測技術之都加州聖塔芭芭拉。
On the night of September 7, 2024, a major fire broke out at a pallet factory on Redfern Street, Wetherill Park, Sydney. The intense blaze, which started around 9:15 PM, quickly escalated to a 14th alarm fire, destroying the factory and causing damage to neighboring properties. More than 40 fire trucks and 150 firefighters were deployed to tackle the fire, which involved around 400 wooden pallets. A HAZMAT crew is monitoring air and water quality. The cause of the fire is still under investigation, and no injuries have been reported.

新聞
A massive factory fire erupted in Wetherill Park, Sydney, overnight, severely damaging a pallet factory on Redfern Street and affecting neighboring properties.
The blaze, classified as a 14th alarm fire, began around 9:15 p.m. on the evening of September 5. Fire and Rescue NSW (FRNSW) received multiple Triple Zero (000) calls reporting approximately 400 wooden pallets engulfed in flames.
In response, over 40 fire trucks and 150 firefighters from across Sydney were deployed to the scene. Despite their efforts, two aerial trucks and more than 40 firefighters remained on-site to fully extinguish the fire.
A HAZMAT crew was also present to monitor air and water quality. NSW Police, NSW Ambulance, and other authorities, including gas and electricity providers, assisted with the incident.
The fire’s cause has yet to be officially determined, but preliminary investigations suggest it may have originated from an electrical fault or equipment malfunction. No injuries have been reported.
The damage is expected to be substantial, with preliminary estimates suggesting losses could reach up to $5 million. The incident underscores the critical importance of advanced early fire detection systems like Planck Vision TNC thermal imaging cameras, which are designed to detect abnormal heat conditions before a fire fully ignites, potentially preventing such extensive damage.
來源: fire.nsw.gov.au
可擴充的早期火災偵測解決方案
用於早期火災偵測、 普朗克視野 TNC 熱像儀 TNC 攝影機遠遠優於傳統系統,因為傳統系統只有在出現可見的煙霧和火焰後才能發出火警。 TNC 攝影機可在火災爆發前監視異常的熱度狀況,有助於防止貨物損毀和生命損失。
六大優勢 Planck Vision 熱感應攝影機:
領先業界的靈敏度:我們的攝影機可輕鬆辨識危險的燃燒前狀況和燃燒後的熱點,提供預警以防止廣泛的損害。
自訂選項:我們提供多種感測器解析度與鏡頭光學選擇,可針對特定的監控需求量身打造攝影機,確保每項應用都能發揮最佳效能。
雙熱感/可視攝影機:將熱感應攝影機與可見光攝影機合而為一,可增強情境感知能力,進行全面監控並迅速回應潛在威脅。
簡易安裝與操作:我們的 IP 攝影機可無縫整合至您的區域網路,簡化安裝與操作,提高效率。
使用者程式分析:透過在 Edge 上執行的分析功能,我們的系統可提供最佳的可靠性,讓使用者能夠自訂監控參數,以進行精確的威脅偵測。
攝影機頭繼電器:透過攝影機雲台繼電器,可在最需要的地方進行控制,方便在緊急情況下快速調整和介入。






