플랑크 비전 시스템 플랜크 비전 시스템은 다음을 포함한 상업용 애플리케이션의 휴대용 검사 및 연중무휴 모니터링을 위한 열화상 솔루션을 제조합니다: 조기 화재 감지, 제조, 변전소 및 터널, 전기 패널/캐비닛, 저장 시설, 데이터 센터 및 체온 상승 검사 등 다양한 분야에서 활용되고 있습니다. 저희 회사는 미국 적외선 감지 기술의 중심지인 캘리포니아주 산타바바라에 본사를 두고 있습니다.
On January 8, 2025, an industrial fire broke out at a recycling facility in Kea’au, Hawaii. The fire, caused by a vehicle compactor, consumed a large scrap metal pile, causing substantial damage. The estimated loss from the incident is approximately $180,000. Firefighters were able to contain the fire by 9:20 a.m. and extinguish it shortly before 10:30 a.m. Metal and appliance recycling services at multiple transfer stations on East Hawaiʻi Island have been temporarily suspended.

뉴스
On January 8, 2025, a fire broke out at a recycling facility located in Kea’au, Hawaii, resulting in significant disruptions. The blaze, which ignited a large scrap metal pile, involved approximately 75% of the 50 ft by 50 ft area. The pile, which contained scrap metal and large tires, was located under a steel metal structure at the facility. The fire was caused by a vehicle compactor that was crushing a car, sparking the pile into flames.
Upon arrival at the scene, emergency units quickly assessed the situation. Firefighters worked swiftly to secure a water supply, bringing the fire under control by 9:20 a.m. Heavy equipment operators from BISM used excavators to dig through the scrap metal pile to expose the seat of the fire, extinguishing the flames by 10:30 a.m.
The fire caused an estimated $180,000 in damage, affecting the recycling services provided at multiple transfer stations. As a result, the East Hawai’i Department of Environmental Management temporarily suspended the acceptance of metals and appliances at several transfer stations, including Honokaʻa, Laupāhoehoe, Volcano, Pāhala, and Waiʻōhinu. However, metal and appliance recycling services are still available at the Pāhoa, Kea‘au, and Hilo Transfer Stations, until those sites reach their capacity.
The fire incident highlights the importance of early fire detection, especially in facilities dealing with large quantities of scrap metal and tires. Planck Vision Systems offers advanced thermal imaging technology that could have detected abnormal heat conditions earlier, potentially preventing the spread of the fire and minimizing the damage. By monitoring temperature variations before visible flames or smoke emerge, thermal imaging systems can play a critical role in preventing the destruction of valuable materials and protecting human life.
출처: khon2.com
조기 화재 감지를 위한 확장 가능한 솔루션
화재 조기 감지용, 플랑크 비전 TNC 열화상 카메라 는 연기와 화염의 가시적 결과가 나타난 후에야 화재를 경고할 수 있는 기존 시스템보다 훨씬 우수합니다. TNC 카메라는 화재가 발생하기 전에 비정상적인 열 상태를 감시하여 물품의 파괴와 인명 손실을 방지하는 데 도움을 줄 수 있습니다.
6가지 장점 플랑크 비전 열화상 카메라:
업계 최고의 감도: 소니 카메라는 위험한 화염 전 상태와 화염 후 핫스팟을 쉽게 식별하여 광범위한 피해를 예방할 수 있도록 조기 경고를 제공합니다.
사용자 지정 가능한 옵션: 소니는 다양한 센서 해상도 및 렌즈 광학 기술을 통해 특정 감시 요구 사항에 맞게 카메라를 맞춤 제작하여 모든 애플리케이션에 최적의 성능을 보장합니다.
듀얼 열화상/실화상 카메라: 열상 카메라와 실화상 카메라를 하나의 장치에 결합하면 상황 인식이 향상되어 포괄적인 모니터링과 잠재적 위협에 대한 신속한 대응이 가능합니다.
간편한 설치 및 작동: 소니의 IP 카메라는 로컬 네트워크에 원활하게 통합되도록 설계되어 설치와 운영을 간소화하여 효율성을 높입니다.
사용자 프로그래밍 분석: Edge에서 실행되는 분석을 통해 최고의 안정성을 제공하며, 사용자가 정확한 위협 탐지를 위해 모니터링 매개변수를 사용자 지정할 수 있도록 지원합니다.
온카메라 헤드 릴레이: 온카메라 헤드 릴레이를 통해 가장 필요한 곳에 컨트롤을 배치하여 중요한 상황에서 빠르게 조정하고 개입할 수 있습니다.






