플랑크 비전 시스템 플랜크 비전 시스템은 다음을 포함한 상업용 애플리케이션의 휴대용 검사 및 연중무휴 모니터링을 위한 열화상 솔루션을 제조합니다: 조기 화재 감지, 제조, 변전소 및 터널, 전기 패널/캐비닛, 저장 시설, 데이터 센터 및 체온 상승 검사 등 다양한 분야에서 활용되고 있습니다. 저희 회사는 미국 적외선 감지 기술의 중심지인 캘리포니아주 산타바바라에 본사를 두고 있습니다.
On Wednesday, January 7, 2025, an industrial fire broke out at the Concrete Systems property in Petrolia, Ontario. The fire, which started just before 2 p.m., engulfed a large drive shed at the back of the facility. About 50 firefighters worked to control the blaze, which caused significant damage, including a roof collapse. The cause of the fire is currently under investigation. Estimated damage from the fire is around $250,000.

뉴스
On Wednesday, January 7, 2025, a large fire broke out at the Concrete Systems property on Centre Street in Petrolia. The blaze started just before 2 p.m. in a large drive shed located at the back of the building. Tim Williams, education officer for the Petrolia/North Enniskillen Fire Department, reported that there were workers inside the building at the time of the fire. Fortunately, all personnel managed to evacuate the premises safely.
As soon as the fire broke out, emergency response teams from Petrolia, Plympton-Wyoming, and St Clair Township rushed to the scene. A total of about 50 firefighters were deployed to control the fire. St Clair Fire arrived with a second ladder truck to join Petrolia’s Tower 13, attacking the fire from above. As night fell, the roof of the building collapsed, and a backhoe was brought in to assist in dismantling parts of the structure, allowing firefighters to access and tackle the remaining hot spots.
Smoke and steam from the fire drifted south over Petrolia, but luckily, no injuries were reported. The fire was under control by the evening, but the damage was extensive. The estimated cost of the damage caused by the fire is approximately $250,000, including the destruction of the building’s roof and significant structural damage.
The cause of the fire remains undetermined, and an investigation is ongoing. The incident highlights the importance of early fire detection in industrial settings, especially when large amounts of materials, such as metal or flammable substances, are stored on-site. Planck Vision Systems’ TNC thermal imaging cameras are specifically designed to detect abnormal heat conditions long before visible flames appear. Early detection helps prevent fires from spreading, minimizing destruction and saving lives.
Through continuous monitoring, thermal imaging systems can detect signs of potential hazards and provide critical information to firefighting teams. Planck Vision Systems’ technology can be particularly beneficial in industrial facilities, where fires can quickly escalate and cause significant damage.
조기 화재 감지를 위한 확장 가능한 솔루션
화재 조기 감지용, 플랑크 비전 TNC 열화상 카메라 는 연기와 화염의 가시적 결과가 나타난 후에야 화재를 경고할 수 있는 기존 시스템보다 훨씬 우수합니다. TNC 카메라는 화재가 발생하기 전에 비정상적인 열 상태를 감시하여 물품의 파괴와 인명 손실을 방지하는 데 도움을 줄 수 있습니다.
6가지 장점 플랑크 비전 열화상 카메라:
업계 최고의 감도: 소니 카메라는 위험한 화염 전 상태와 화염 후 핫스팟을 쉽게 식별하여 광범위한 피해를 예방할 수 있도록 조기 경고를 제공합니다.
사용자 지정 가능한 옵션: 소니는 다양한 센서 해상도 및 렌즈 광학 기술을 통해 특정 감시 요구 사항에 맞게 카메라를 맞춤 제작하여 모든 애플리케이션에 최적의 성능을 보장합니다.
듀얼 열화상/실화상 카메라: 열상 카메라와 실화상 카메라를 하나의 장치에 결합하면 상황 인식이 향상되어 포괄적인 모니터링과 잠재적 위협에 대한 신속한 대응이 가능합니다.
간편한 설치 및 작동: 소니의 IP 카메라는 로컬 네트워크에 원활하게 통합되도록 설계되어 설치와 운영을 간소화하여 효율성을 높입니다.
사용자 프로그래밍 분석: Edge에서 실행되는 분석을 통해 최고의 안정성을 제공하며, 사용자가 정확한 위협 탐지를 위해 모니터링 매개변수를 사용자 지정할 수 있도록 지원합니다.
온카메라 헤드 릴레이: 온카메라 헤드 릴레이를 통해 가장 필요한 곳에 컨트롤을 배치하여 중요한 상황에서 빠르게 조정하고 개입할 수 있습니다.






