플랑크 비전 시스템 플랜크 비전 시스템은 다음을 포함한 상업용 애플리케이션의 휴대용 검사 및 연중무휴 모니터링을 위한 열화상 솔루션을 제조합니다: 조기 화재 감지, 제조, 변전소 및 터널, 전기 패널/캐비닛, 저장 시설, 데이터 센터 및 체온 상승 검사 등 다양한 분야에서 활용되고 있습니다. 저희 회사는 미국 적외선 감지 기술의 중심지인 캘리포니아주 산타바바라에 본사를 두고 있습니다.
On January 14, 2025, around 7:30 a.m., a major industrial fire broke out at Business Centre West in Letchworth Garden City, UK. The fire spread rapidly, prompting the deployment of 8 fire engines. By 3 p.m., the blaze had been contained, with one fire engine remaining on-site to investigate the cause. The fire caused an estimated loss of over $3 million but thankfully resulted in no injuries. Residents were advised to avoid the area to facilitate emergency operations.

뉴스
On January 14, 2025, at approximately 7:30 a.m., an industrial fire broke out at Business Centre West in Letchworth Garden City. The fire quickly escalated, prompting a swift and coordinated response from local fire services. A total of eight fire engines were dispatched to the scene to tackle the blaze, which caused significant damage to the commercial facilities in the area. According to estimates, the damage is expected to exceed $3 million.
Fortunately, no injuries were reported, thanks to the quick action of emergency responders and the building’s safety protocols. By 3 p.m. that same day, the fire was fully contained, though one fire engine remained on-site to monitor and examine the scene for any potential flare-ups.
While the exact cause of the fire is still under investigation, the incident highlights the critical importance of early fire detection and prevention measures. Traditional fire alarm systems often rely on the detection of visible smoke or flames before they are triggered. However, these systems can sometimes be too late to prevent significant damage. In high-risk industrial areas, the use of advanced technologies like the Planck Vision TNC thermal imaging cameras offers a more proactive approach. These cameras detect abnormal heat patterns and provide early warnings before a fire has even ignited.
Implementing thermal imaging technology can help to significantly reduce the risk of fire damage and loss of life. It enables companies to take preventative measures by detecting potential hazards before they become catastrophic. This kind of proactive safety technology is especially critical in environments where combustible materials and high temperatures are commonplace. High-risk industrial sectors should consider integrating thermal imaging systems as a part of their comprehensive fire prevention strategy to safeguard both human lives and valuable property.
출처: thecomet.net
조기 화재 감지를 위한 확장 가능한 솔루션
화재 조기 감지용, 플랑크 비전 TNC 열화상 카메라 는 연기와 화염의 가시적 결과가 나타난 후에야 화재를 경고할 수 있는 기존 시스템보다 훨씬 우수합니다. TNC 카메라는 화재가 발생하기 전에 비정상적인 열 상태를 감시하여 물품의 파괴와 인명 손실을 방지하는 데 도움을 줄 수 있습니다.
6가지 장점 플랑크 비전 열화상 카메라:
업계 최고의 감도: 소니 카메라는 위험한 화염 전 상태와 화염 후 핫스팟을 쉽게 식별하여 광범위한 피해를 예방할 수 있도록 조기 경고를 제공합니다.
사용자 지정 가능한 옵션: 소니는 다양한 센서 해상도 및 렌즈 광학 기술을 통해 특정 감시 요구 사항에 맞게 카메라를 맞춤 제작하여 모든 애플리케이션에 최적의 성능을 보장합니다.
듀얼 열화상/실화상 카메라: 열상 카메라와 실화상 카메라를 하나의 장치에 결합하면 상황 인식이 향상되어 포괄적인 모니터링과 잠재적 위협에 대한 신속한 대응이 가능합니다.
간편한 설치 및 작동: 소니의 IP 카메라는 로컬 네트워크에 원활하게 통합되도록 설계되어 설치와 운영을 간소화하여 효율성을 높입니다.
사용자 프로그래밍 분석: Edge에서 실행되는 분석을 통해 최고의 안정성을 제공하며, 사용자가 정확한 위협 탐지를 위해 모니터링 매개변수를 사용자 지정할 수 있도록 지원합니다.
온카메라 헤드 릴레이: 온카메라 헤드 릴레이를 통해 가장 필요한 곳에 컨트롤을 배치하여 중요한 상황에서 빠르게 조정하고 개입할 수 있습니다.






